Headliner - cleaner / adhesive residue remover

Headliner - cleaner / adhesive residue remover

The inner headliner is often renewed during a restoration.
The insulating mats underneath are usually in a very bad condition
condition and should be exchanged for new ones.

In order to cleanly and easily remove the old remains of the insulating mats on the roof, we recommend
we offer you our headliner cleaner. Spray the old insulation generously and leave to take effect
and carefully remove with our plastic scraper. Here, the longer the exposure time, the easier it is to remove the residue. The headlining cleaner will take one for you
most of the work off. Once it has worked, it dissolves the adhesive residue almost automatically.

To protect the interior, we recommend laying out a disposable tarpaulin.
Here you will find everything in one set!

The headliner cleaner is also suitable for removing stickers or adhesive residues. It smells pleasantly of citrus and is very productive.

scope of delivery

1 can of headliner cleaner 500ml

Technical Data Sheet
Easily and quickly removes adhesive residues and stickers on treated and untreated
Parts made of metal, glass, wood, stone and various types of plastic.
Thanks to the low evaporation rate, the headliner cleaner has long-lasting dissolving power, which enables the product to be used extremely efficiently and economically.

Ideal for windows and painted surfaces
Material-friendly and residue-free
Long-lasting dissolving power
Non-corrosive
Ideal for car and household

Physical and chemical data
Basis: D-limonene
Colour: transparent
Odor: citrus scent
Spray rate: 1.5 - 2.0 g/s
Specific gravity at 20°C: 0.84 g/ml
Refractive index at 20°C: 1.472
Vapor pressure at 20°C: 3.5 bar
Propellant: propane / butane
Shelf Life/Storage:
10 years with proper storage (=10°-25°C,
relative humidity of max. 60%)
Container/Content:
Aerosol can with 500ml net volume

application
Bring the can to room temperature.
Best processing temperature 5° to 30°C.
Shake before use.
Spray adhesive residue over the entire surface and
let absorb.
Then remove loosened adhesive residue.
If necessary, repeat the process.
Wipe treated area with a clean, lint-free cloth.
Check the compatibility of the substrate before use